next »

[CoolGoose]

Nu reusesc in nici un fel sa-l conving sa gaseasca vreun program.
v4l-info imi spune http://pastebin.ca/902918
v4l-conf imi da o eroare

Code:

v4l-conf: using X11 display :0.0
dga: version 2.0
X Error of failed request:  XF86DGANoDirectVideoMode
  Major opcode of failed request:  137 (XFree86-DGA)
  Minor opcode of failed request:  1 (XF86DGAGetVideoLL)
  Serial number of failed request:  13
  Current serial number in output stream:  13

Din cate am gasit pe internet, eroarea este din cauza driverelor proprietare nvidia si teoretic nu ar trebui sa aiba legatura cu faptul ca nu gasesc nici un program.
dmesg zice:

Code:

dmesg | grep tv
[   39.703182] bttv: driver version 0.9.17 loaded
[   39.703185] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   39.703236] bttv: Bt8xx card found (0).
[   39.703266] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 19, latency: 32, mmio: 0xea100000
[   39.703274] bttv0: detected: Leadtek TV 2000 XP [card=34], PCI subsystem ID is 107d:6609
[   39.703277] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]
[   39.703300] bttv0: gpio: en=00000000, out=00000000 in=003ff500 [init]
[   39.703653] bttv0: using tuner=5
[   39.703656] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[   39.733421] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[   39.734029] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   39.734632] bttv0: i2c: checking for TDA9887 @ 0x86... found
[   40.066603] bttv0: registered device video0
[   40.066639] bttv0: registered device vbi0
[   40.066664] bttv0: registered device radio0
[   40.066689] bttv0: PLL: 28636363 => 35468950 .. ok
[   40.097665] input: bttv IR (card=34) as /class/input/input3
[  122.500980] bttv0: PLL can sleep, using XTAL (28636363).
[  138.310697] bttv0: PLL: 28636363 => 35468950 .. ok
[  713.277691] bttv0: PLL can sleep, using XTAL (28636363).
[  722.991112] bttv0: PLL: 28636363 => 35468950 .. ok
[ 1011.271388] bttv0: timeout: drop=324 irq=210164/210164, risc=35b26024, bits: HSYNC OFLOW
[ 1011.274976] bttv0: reset, reinitialize
[ 1011.299797] bttv0: PLL: 28636363 => 35468950 . ok

Ca programe am folosit kdetv (pal/east-europe) si tvtime(pal/europe).
Are cineva vreo idee ?

[CoolGoose]

Ok se pare ca era problema cu faptul ca incerca sa foloseasca tunner=5.
Asa ca

Code:

sudo rmmode bttv

si apoi iar

Code:

sudo modprobe bttv card=34 tuner=56 radio=0

Si totul merge bine. Folosesc tuner = 56 deoarece se pare ca este cel mai bun (si in urma testelor asa este) pentru Winfast 2000 XP.